Inverter options.
These are the inverter brands our accredited partner companies fit across the UK. Slide across to see the solar panels, batteries and EV chargers that complete the system. Tap any brand for an honest, plain-English breakdown.
How does a solar inverter work?.
Your solar panels make direct current (DC) electricity. Your home — and everything plugged into it — runs on alternating current (AC) at 230 volts and 50 hertz. The inverter is the box that sits between the two, converting DC into grid-standard AC many times a second. It’s the brain of the system: as well as converting power, it tracks output, manages safety, and governs how any surplus is sent to the grid. Because it’s the hardest-working component, it’s also the part most likely to need attention over a system’s life — which is exactly why it’s worth understanding before you compare quotes.
DC in, AC out
Panels make DC; your home runs on AC at 230V, 50Hz. The inverter converts one to the other, cleanly and continuously.
~96–99% efficient
Modern home inverters peak around 96–99%, with weighted (European/CEC) efficiency typically about 96.5–98%.
MPPT handles split roofs
Maximum Power Point Tracking (and multiple trackers) lets panels on different roof faces or in shade perform independently.
Replaced sooner than panels
Panels last ~25–30 years; inverters often ~10–15 — so warranty length and UK support really matter.
The conversion that powers your home.
Panels generate low-voltage DC that can charge a battery directly but can’t safely run a kettle or a heat pump. The inverter switches that DC back and forth extremely quickly and smooths it into a clean AC sine wave that matches the grid — at up to around 98–99% efficiency on the best units, so almost none of your hard-won solar is lost in the process.
A hybrid inverter does all this while also managing a battery and the grid connection, deciding second by second whether to power the house, charge the battery, or export the surplus for a Smart Export Guarantee payment.
Direct current — can’t run the home on its own.
Clean 230V AC for every appliance and the grid.
The types of solar inverter.
Not every inverter does the same job. Which suits you depends on whether you want a battery now or later, how much shade your roof gets, and how it’s laid out. Here are the main types an MCS-accredited installer will offer.
Hybrid
Runs panels and a battery from one box, usually with backup. Costs a little more than a plain string inverter but is battery-ready from day one.
Best for: most new solar + battery installsString
One central inverter for all your panels — the cheapest, proven design. The catch: the whole string performs to the level of its weakest, shaded panel.
Best for: a simple, unshaded roofMicroinverter
A tiny inverter under every panel, so shade on one never drags down the rest — with per-panel monitoring and built-in rapid shutdown. Costs more.
Best for: shaded or multi-angle roofsAll-in-one
Inverter and battery built as a single matched unit (e.g. Powerwall 3, SigenStor). Simplest install and one warranty — but a closed ecosystem.
Best for: the simplest package| Type | Best for | Battery approach | Relative cost |
|---|---|---|---|
| String inverter | Simple, unshaded roof; solar only | None built in (add AC-coupled later) | £ lowest |
| Hybrid inverter | Most new solar + battery installs | DC-coupled battery in one unit | ££ |
| Power optimisers | Partly shaded roofs, one central inverter | Usually DC-coupled hybrid | ££–£££ |
| Microinverters | Shaded / complex / multi-angle roofs | AC-coupled battery | £££ |
| All-in-one system | Simplest solar + battery package | DC-coupled, matched battery | £££ premium names |
Power optimisers (e.g. SolarEdge) are a middle path — a small unit on each panel feeding one central inverter, giving panel-level monitoring and safety features like SafeDC without a micro on every panel.
Adding a battery: AC-coupled or a new hybrid?.
If you already have working panels and now want storage, this is the key decision — and you usually don’t need to touch your existing inverter.
AC-coupled retrofit. A battery with its own small inverter is added alongside your current setup. You keep your existing MCS-certified panels and inverter, so it’s typically the cheaper, less disruptive route. It’s slightly less efficient (roughly 90% round-trip vs about 95% for DC-coupled), but that rarely outweighs the cost of replacing kit that already works.
New DC-coupled hybrid. Swapping your inverter for a hybrid and connecting the battery directly is more efficient, but rarely worth scrapping a healthy inverter just to add storage.
Rule of thumb
The inverter is as important as the panels.
- It sets your efficiency. A better inverter loses less of your solar in the DC-to-AC conversion — and it processes almost every unit you generate, every day, for years.
- It decides your battery future. Choose a hybrid now and adding storage later is simple; the wrong inverter can mean a costly swap.
- It keeps you running in a cut. Only backup-capable (EPS) models with a battery power your essentials when the grid goes down — standard solar switches off for safety.
- It’s the part most likely to need attention first. Panels routinely outlast their inverter, so warranty length, what it covers, and UK support and stock all matter.
What to check on a quote
Grants and incentives in the UK.
A compliant system fitted by an MCS-accredited installer qualifies for the schemes that make solar and storage pay back faster. Rules and rates change, so confirm the current position with your installer and supplier.
Smart Export Guarantee
Licensed suppliers pay you for the surplus you export. There’s no fixed rate — it varies by supplier, so compare, and you can sell to a different supplier than you buy from.
0% VAT
Solar, batteries and inverters installed together currently attract 0% VAT in Great Britain — a time-limited relief currently set to run until 31 March 2027.
G98 / G99
Grid-connection approval via your network operator. G98 for smaller systems (broadly up to 3.68kW per phase); G99 (pre-approval) for larger ones. Your installer handles it.
MCS certified
Accredited installation is what unlocks the SEG, protects your warranty, and proves your system meets recognised standards.
Getting the right inverter for your home.
Energy Saving Hub matches you with MCS-accredited independent installers — so you get competitive quotes and honest advice without the hard sell.
Tell us about your home
Answer a few quick questions about your roof, energy use and whether you want a battery. It takes about a minute.
Get matched to installers
We connect you with trusted local partners who fit the inverter brands that suit your system.
Compare and decide
Receive tailored quotes, compare inverters and prices at your own pace, and choose what’s right for you.
Solar inverter FAQ.
What does a solar inverter actually do?
It converts the DC electricity your panels make into the AC electricity your home and the grid use. Without it, the power from your roof couldn’t run your appliances or be exported. It also monitors the system, manages safety, and reports on your generation — so it’s the brain of a solar setup, not just a converter.
What’s the difference between a string and a hybrid inverter?
A string inverter only converts solar DC to AC. A hybrid does that and also manages a battery — charging it from surplus solar and discharging it to power your home — usually with backup in an outage. In short: a string inverter runs panels only; a hybrid runs panels and a battery together.
Do I need a hybrid inverter if I don’t have a battery yet?
Not strictly, but it’s often the sensible choice if a battery is likely later. The price gap over a plain string inverter is usually small (commonly a few hundred pounds), whereas switching to a hybrid down the line can mean replacing the whole inverter. If you’re confident you’ll never add storage, a string inverter is fine.
How long do inverters last, and how often do they need replacing?
Most string and hybrid inverters last around 10–15 years, so it’s realistic to expect one replacement over the 25–30 year life of the panels. A like-for-like swap typically costs in the region of £800–£1,500 plus fitting. Microinverters and optimiser systems often carry much longer warranties — around 25 years.
Will my system work in a power cut?
Usually not by default — standard grid-connected solar shuts down in a cut for safety. To keep essentials running you need a battery paired with an inverter that offers Emergency Power Supply (EPS). Backup can be whole-home or just essential circuits (lights, fridge, router), and it must be specified and wired in at installation, so flag it up front.
Can I add a battery to my existing solar inverter?
Yes, in most cases — commonly by “AC-coupling” a battery with its own small inverter alongside your existing setup, so you keep the kit you already have. It’s usually the simpler, cheaper retrofit. The alternative is swapping your inverter for a hybrid (DC-coupling), which is more efficient but a bigger job.
What size inverter do I need?
It should be matched to your array, not picked off a shelf. In the UK it’s common and sensible to pair a slightly larger panel array with a slightly smaller inverter — a DC-to-AC ratio of roughly 1.1–1.3 — because our panels rarely hit full rated output for long. The exact figure depends on your roof, orientation and any export limits, so leave final sizing to your installer’s design.
What warranty should I expect?
Standard inverter warranties commonly run from about 5 years up to 10–12, and many brands let you extend cover (often to 15, 20 or 25 years) for a fee. Because the inverter is the part most likely to need replacing first, check the length — and what it covers (parts only, or parts plus labour), as call-out and fitting are often separate.
Does the inverter brand really matter?
To an extent, yes. Brand affects reliability, warranty length, monitoring software and — importantly — the maker’s ability to honour warranties and provide support years later. Established brands with solid UK service tend to be a safer long-term bet, though even well-known names can run into difficulty. A quality install by an MCS-accredited installer matters just as much as the badge.
Can I get export payments (SEG) with any inverter?
Export eligibility depends on the installation, not the inverter brand. You need an MCS-certified install using certified products, plus a smart meter that can record your export half-hour by half-hour. Rates vary a lot between suppliers, so it’s worth shopping around for an SEG tariff once you’re installed.
Your happiness is what counts.
Impressive service and commitment to sustainability. Their solar solutions reduced our energy costs significantly while helping the environment. Highly recommend!
John DA game-changer for clean energy. The installation was smooth, and their team was knowledgeable and professional. We’re thrilled with the results.
Sophia LOutstanding experience from start to finish. They made transitioning to renewable energy easy and affordable. A fantastic investment for the future!
James TReady to find your inverter?
Get free, no-obligation quotes from independent, MCS-accredited installers near you.
Specifications, efficiency figures, warranty terms, SEG rates and the 0% VAT relief all vary and can change over time. Details above are indicative and for general guidance; confirm current figures and terms with your installer and energy supplier. Energy Saving Hub introduces homeowners to independent, MCS-accredited installers and does not carry out installations directly.















