How Do Heat Pumps Work?



1 unit in
3 to 4 units of heat out
Air or ground
Where the heat comes from
Like a fridge
Working in reverse
35-55°C
Typical flow temperature

A heat pump works like a fridge in reverse. Instead of moving heat out of a cold box, it gathers warmth from the outside air or the ground, concentrates it, and moves it into your home for heating and hot water. Because it moves heat rather than burning fuel to make it, every unit of electricity it uses delivers three to four units of heat. This guide explains the cycle in plain English.

The short answer: a fridge in reverse

A heat pump works like a fridge in reverse. A fridge moves heat out of a cold box into the room around it. A heat pump does the same job the other way round: it gathers warmth from the outside air or the ground and moves it into your home for heating and hot water.

The key idea is that a heat pump does not burn any fuel to make heat. It moves heat that is already there. That single difference is why it can warm a whole house using a fraction of the energy a gas boiler would need.

Why moving heat beats making heat

A gas boiler creates heat by burning fuel, so at its very best it gives you back a little less than one unit of warmth for every unit of energy you put in. A heat pump does not make heat at all, it simply moves existing heat from outside to inside, and moving heat costs far less energy than making it.

The result is striking. For every unit of electricity a heat pump uses, it delivers about 3 to 4 units of heat. You may see this measured in two ways:

  • COP (Coefficient of Performance) is the instant ratio at a single moment.
  • SCOP (Seasonal COP) is the average across a whole heating season, including cold snaps and milder days. This is the figure that matters in real use, because it reflects how the system performs across a typical British year.

A higher SCOP means lower running costs, which is one of the biggest factors when working out whether a heat pump is worth it for your home.

Key takeaway

A heat pump is not 100% efficient like a perfect boiler. It is roughly 300% to 400% efficient, because it harvests free heat from the environment and only pays for the electricity to move it.

The four-stage cycle, in plain English

Inside every heat pump is a sealed loop carrying a special liquid called a refrigerant, which boils at a very low temperature. As that refrigerant travels round the loop it passes through four stages, again and again. The table below sets out what happens at each stage.

Stage What happens In plain English
1. Evaporator The refrigerant absorbs heat from the outside air or ground and boils into a gas, even when it is cold outside. The system soaks up warmth from outdoors and the refrigerant turns to vapour.
2. Compressor The gas is compressed, which raises its temperature sharply. Squeezing the gas concentrates the warmth and makes it much hotter.
3. Condenser (heat exchanger) The hot gas gives up its heat to the water in your heating system, then condenses back to a liquid. The heat is handed over to your radiators and hot water, and the gas cools back to liquid.
4. Expansion valve The liquid passes through a valve that drops its pressure and temperature, and the cycle repeats. The refrigerant is cooled right down again so it is ready to absorb more heat.

Then the loop starts over. Because the refrigerant is constantly recycled, the heat pump can keep collecting and concentrating warmth for as long as you need heating or hot water.

The clever part: the refrigerant

The whole process hinges on the refrigerant. It is chosen because it boils at a very low temperature, far below the freezing point of water. That matters because even air that feels cold to us still holds plenty of energy, and the refrigerant can soak up that energy and turn from liquid to gas.

By changing the refrigerant’s pressure, the heat pump controls when it boils and when it condenses. Lowering the pressure lets it absorb heat outside, and raising the pressure (through the compressor) lets it release that heat inside at a useful temperature. No flames, no combustion, just a quiet cycle of pressure and temperature changes doing the work.

Where the heat comes from: air or ground

There are two common places a heat pump can gather its warmth, and both feed the same indoor cycle.

  • Air source heat pumps draw heat from the outside air. They are the most popular choice in UK homes because they are simpler and cheaper to install, with a unit that sits outside much like an air conditioning box.
  • Ground source heat pumps draw heat from buried pipes in the ground. The ground stays at a steadier temperature all year, which can make them slightly more efficient, but they need space and groundworks to install.

Either way the indoor cycle is exactly the same, only the source of the free heat differs. If you want to weigh up the two, our guide to air source and ground source heat pumps explains the trade-offs in detail. The Energy Saving Trust also has independent guidance at energysavingtrust.org.uk.

How the heat reaches your rooms

Once the refrigerant has handed its warmth to the water in your system, that warmth is delivered through radiators, underfloor heating, or a hot water cylinder, just as with a conventional boiler.

There is one important difference. Heat pumps run at a lower flow temperature than a boiler, typically 35 to 50°C versus a boiler’s 60 to 70°C. This gentler, steadier heat is more efficient, but because the water is cooler it needs more surface area to warm the room. That is why larger radiators or underfloor heating help a heat pump perform at its best.

In practice this means a heat pump warms your home in a slow and steady way rather than blasting out short bursts of very hot water. Many homeowners find the result is a more even, comfortable warmth across the day.

Air-to-water versus air-to-air

Not every heat pump delivers heat the same way, and the difference matters for what you get.

  • An air-to-water heat pump heats water for radiators, underfloor heating and a hot water cylinder. This is the usual UK home setup, because it replaces a gas boiler and provides both central heating and hot water.
  • An air-to-air heat pump delivers warm air directly, much like air conditioning in reverse. It does not provide hot water, so it cannot replace your boiler on its own.

For most British households looking to swap out a boiler, an air-to-water system is the natural fit, since it plugs into the radiators and cylinder you already understand.

Does it really work when it is cold?

Yes. This is the most common worry, and the physics is reassuring. Heat pumps keep working in winter, down to around minus 15°C to minus 25°C, because the refrigerant boils at such a low temperature that there is still usable heat in cold air, even on a frosty morning.

Performance does dip a little in very cold weather, since there is less warmth to gather, but a well-designed system sized for your home will keep you comfortable through a British winter. We cover the detail of whether they work in winter in a separate guide if you want reassurance on those colder days.

Is all this enough to make a heat pump worth it?

Understanding how a heat pump works is the first step. The next is working out whether the efficiency translates into savings and comfort in your particular home, which depends on your insulation, your radiators, your current heating bills and the installer you choose.

That is where quality matters. A heat pump only delivers its promised efficiency when it is correctly sized and installed, which is why we only work with MCS certified installers. To dig into the numbers, our pillar guide on whether a heat pump is worth it walks through costs, savings and grants in plain English.

How Energy Saving Hub helps

Energy Saving Hub is a comparison service, not an installer. We do not fit heat pumps ourselves, and we have no stake in pushing any one brand or product. Our job is simply to match you with accredited, MCS-certified installers who can survey your home and quote properly.

You tell us a few details about your property, and we connect you with trusted local installers so you can compare like-for-like quotes without the hard sell. It costs you nothing to get matched, and there is no obligation to go ahead. That way you can take the science you have just read and turn it into real quotes from people qualified to do the job.

So, that is how a heat pump works

A heat pump is a fridge in reverse: it moves existing heat rather than burning fuel to make it, which is why it delivers roughly 3 to 4 units of heat for every unit of electricity. A low-temperature refrigerant cycles through four stages, evaporator, compressor, condenser and expansion valve, gathering warmth from the air or ground and releasing it into your radiators, underfloor heating or hot water cylinder. It runs at a gentler flow temperature than a boiler, keeps working deep into winter, and in its common air-to-water form replaces a gas boiler entirely. Once you understand that, the only question left is whether it is right for your home, and that is exactly what we can help you find out.

Frequently Asked Questions

How does a heat pump work?

A heat pump works like a fridge in reverse. It gathers warmth from the outside air or ground and moves it into your home for heating and hot water. It does not burn fuel to make heat, it moves existing heat using a refrigerant, which is why it delivers about 3 to 4 units of heat for every unit of electricity used.

How does a heat pump work in winter?

Heat pumps keep working in winter, down to around minus 15°C to minus 25°C. The refrigerant inside boils at such a low temperature that there is still usable heat even in cold air. Performance dips slightly in very cold weather, but a properly sized system will keep a British home comfortable through frosty days.

What is a heat pump?

A heat pump is a heating system that moves heat rather than burning fuel to make it. It gathers warmth from the outside air or the ground and delivers it to your radiators, underfloor heating or hot water cylinder. Because it only pays for the electricity to move heat, it is far more efficient than a gas boiler.

Are heat pumps like a fridge?

Yes, a heat pump works like a fridge in reverse. A fridge moves heat out of a cold box into the room around it. A heat pump does the same job the other way round, gathering warmth from outside and moving it into your home. Both rely on the same refrigerant cycle to shift heat from one place to another.

What is the difference between air to air and air to water?

An air-to-water heat pump heats water for radiators, underfloor heating and a hot water cylinder, the usual UK home setup that replaces a gas boiler. An air-to-air heat pump delivers warm air directly, like air conditioning in reverse, and does not provide hot water, so it cannot replace your boiler on its own.

Do heat pumps use a lot of electricity?

No, heat pumps are very efficient with electricity. For every unit of electricity they use, they deliver about 3 to 4 units of heat, because they move existing warmth rather than making it. This seasonal average, called the SCOP, is why a well-installed heat pump can cost less to run than a traditional boiler.

Why is a heat pump so efficient?

A heat pump is efficient because it moves heat instead of making it. A boiler burns fuel to create warmth, while a heat pump simply harvests free heat from the air or ground and pays only for the electricity to move it. This is why it is roughly 300% to 400% efficient, delivering far more heat than the energy it consumes.

See What a Heat Pump Could Do for Your Home

Compare free quotes from accredited, MCS-certified installers and get a system designed around how your home actually loses heat.

Get a Free Quote
Speak to Our Experts

ESH
The Energy Saving Hub TeamEnergy Saving Hub is a comparison service that helps UK homeowners compare heat pump, solar and EV charger quotes from accredited, MCS-certified installers. Reviewed by an MCS-certified heat pump installer. Energy Saving Hub, Manvers Way, Wath upon Dearne, S63 5DA.

Published June 2026. The figures in this guide are typical UK ranges for 2026 and are intended as a guide; your own numbers depend on your home, so request a tailored quote for exact costs and savings.