Why homeowners ask for Baxi

The boiler name that quietly went electric.

Baxi has warmed British homes for over a century — there’s a fair chance the boiler in your airing cupboard wears the badge. Now part of the international BDR Thermea group, Baxi has taken that same trusted, merchant-and-installer supply chain and built a proper range of air-source heat pumps: the Assure and HP-series monoblocs, from 4kW to 13kW, sold through the very merchants and engineers your household already uses. An air-source heat pump doesn’t burn anything — it moves heat from the outside air into your home, delivering three to four units of heat for every unit of electricity. On this page we explain, plainly, how a heat pump actually works, the exact Baxi models our partners fit, the R32-versus-R290 choice that matters most, and an honest view of where Baxi wins and where it doesn’t.

A name you already trust

Baxi has been a mainstream UK heating brand for over 100 years — now applying that reputation to heat pumps, backed by the BDR Thermea group.

Next-gen R290 option

The HP60 and Assure HP55 run on R290 (propane) with a GWP of just 3 — and reach 75°C flow, ideal for keeping your existing radiators.

Efficient & quiet

SCOP up to 5.34 on the R290 models and sound power from just 48 dB(A) — roughly the hum of a fridge.

Grant & MCS ready

Fitted by an MCS-accredited installer, a Baxi heat pump qualifies for the £7,500 Boiler Upgrade Scheme grant and 0% VAT.

The technology, simply

What does an air-source heat pump do?.

A boiler makes heat by burning gas. A heat pump doesn’t burn anything — it works like a fridge in reverse, using a compressor and refrigerant to pull low-grade heat out of the outside air (it still works well below freezing) and upgrade it to a useful temperature for your home. Because it’s moving heat rather than creating it, it typically delivers three to four units of heat per unit of electricity. That ratio, measured across a year, is the SCOP.

It’s a wet system, so it heats water for your radiators or underfloor heating and a hot-water cylinder — the same principle as your boiler, just at a lower flow temperature. That lower temperature is why heat pumps sip electricity, but it also means some radiators may need up-sizing, and the system needs the right cylinder, controls and emitters designed around it. Baxi’s units are monobloc: one sealed outdoor box with the refrigerant factory-charged, so nothing complex runs into the house.

In short: a trusted heating brand’s route to going electric — the same merchants and engineers, a low-carbon machine.

Old gas boiler
Burns fuel on-site, ~90% efficient at best, rising carbon.
Baxi air-source heat pump
Moves heat from the air — up to ~400% efficient, low carbon.
The choice that matters most

R32 or R290? The refrigerant decides a lot.

  • R32 — the proven, efficient standard (HP40 & HP50). Widely used, well understood, and efficient up to around 55–65°C flow. A sensible fit for well-insulated homes or where radiators are already generous.
  • R290 — propane, the future-proof upgrade (HP55 & HP60). Its global-warming potential is just 3 (versus ~675 for R32), so it sidesteps the F-gas phase-down — and its thermodynamics reach 75°C flow efficiently.
  • Why 75°C matters for retrofit. A higher flow temperature means the R290 models can often drive your existing radiators without oversizing every one — the single biggest reason the HP60 is the go-to for older homes.
  • Efficiency you can compare. The R290 HP55/HP60 quote a SCOP of up to 5.34 at 35°C flow; even at a demanding 55°C they hold around 3.99. The R32 HP40/HP50 reach up to 5.03.
  • Siting is the installer’s job. R290 is mildly flammable, so it has slightly stricter positioning rules — all handled within your installer’s MCS design and survey.
Get matched with a Baxi installer

Baxi ASHP at a glance

TypeMonobloc air-source
Domestic rangeAssure / HP40–HP60
Output span4–13 kW
RefrigerantR32 or R290 (HP55/60)
Top SCOP @35°CUp to 5.34
Max flow tempUp to 75°C (R290)
Warranty2–7 yr, model-dependent
Why you can trust the badge

Backing that runs deep.

Baxi’s credentials come from scale and heritage rather than novelty: a century of UK heating, a global engineering group, MCS certification and a distribution network that already reaches your street.

100+ years
A mainstream British heating brand since the early 20th century
BDR Thermea
Part of the international group behind Remeha, Megaflo & more
MCS certified
The scheme required for grants and export payments
GWP 3 (R290)
Near-zero climate impact on the HP55 & HP60
Merchant network
Sold through the same trade channel your engineer uses
The range our installers fit

The Baxi heat pumps our partners install.

These are the four domestic monoblocs our independent partners design and quote with — two R32 models for standard flow temperatures, and two R290 high-temperature models built for retrofit. All four span 4kW to 13kW.

HP60 · R290 flagship
Baxi HP60 High-Temp Monobloc
4–13 kW
SCOP up to 5.34
R29075°C flow48 dB(A)
Up to 7-yr warranty*
GWP 3 · retrofit-ready
HP55 · R290 Assure
Baxi Assure HP55 High-Temp
4–13 kW
SCOP up to 5.34
R29075°C flow48 dB(A)
Up to 7-yr warranty*
Assure spec range sibling
HP40 · R32 workhorse
Baxi HP40 Monobloc
4–13 kW
SCOP up to 5.03
R3255°C flowA+++
Up to 5-yr warranty†
Volume mid-temp model
HP50 · R32 Assure
Baxi Assure HP50 Monobloc
4–13 kW
SCOP up to 5.03
R3265°C flowA+++
2-yr warranty†
Higher flow ceiling

SCOP figures are Baxi’s manufacturer-claimed values at 35°C flow; the headline 5.34 is the smallest (4kW) R290 unit — larger 11–13kW units sit nearer 4.70. Warranty terms vary by model, installer and registration (the “up to” figures are subject to Baxi’s terms) — confirm exactly what applies on your quote. Note: Baxi’s Auriga range is a commercial product and is not part of this domestic line-up. Specifications from Baxi’s official product pages.

How Baxi stacks up

Baxi vs the alternatives.

No heat pump is best for everyone. Here’s an honest, like-for-like look at how Baxi compares with the other brands most UK homeowners weigh up.

 Baxi (HP-series)Heat-pump specialists
(Mitsubishi, Daikin)
Other boiler crossovers
(Worcester Bosch, Ideal)
Top SCOP @35°CStrong — up to 5.34 (R290)Strong — ~4.9–5.4Comparable — ~4.5–5.0
High-temp optionYes — R290 to 75°CYes — R290/R32 rangesYes — R290 models
RefrigerantR32 or R290 (HP55/60)R32 or R290Mostly R290
Heat-pump track recordNewer — boiler heritageLongest — decadesNewer — boiler heritage
Warranty2–7 yr, model-dependent5–7 yr typicalUp to 7–10 yr
Best forTrusted brand & retrofitProven performanceBrand familiarity
The honest verdict

Is Baxi right for you?.

We’re a comparison service, not a manufacturer — so here’s the full picture. Baxi is the familiar-brand pick, with a couple of things worth knowing.

Why homeowners choose Baxi

  • A brand you already know. If you’ve had a Baxi boiler, moving to a Baxi heat pump keeps you with a familiar, long-established name and the same trade network.
  • A genuine retrofit answer. The R290 HP55/HP60 reach 75°C, so they can often run your existing radiators — no need to replace every one.
  • Future-proof refrigerant. R290 has a GWP of just 3, sidestepping the F-gas phase-down that will squeeze older refrigerants.
  • Quiet and efficient. Sound power from 48 dB(A) and a SCOP up to 5.34 put the R290 models among the stronger figures on the market.

Things to weigh up

  • Newer to heat pumps. Baxi is a boiler institution, but as a heat-pump maker it has a shorter track record than specialists like Mitsubishi or Daikin.
  • Warranty varies a lot. Cover ranges from 2 years (HP50) to up to 7 (HP55/HP60) and depends on registration and the installer — check the exact term in writing.
  • “Up to 5.34” is the small unit. That headline SCOP belongs to the 4kW R290 model; larger 11–13kW units are closer to 4.70.
  • No direct-to-homeowner sales. Baxi supplies through merchants and installers, so you buy through an accredited fitter — not from Baxi itself. (And its Auriga range is commercial-only.)
Your questions, answered

Baxi heat pump FAQ.

Who are Baxi — and can I trust them with a heat pump?

Baxi Heating UK Limited is one of Britain’s longest-established heating brands, making boilers for over a century, and is part of the international BDR Thermea group (which also owns Remeha, Megaflo, Andrews and others). Its air-source heat pumps are a newer venture than a specialist like Mitsubishi, but they’re MCS-certified and backed by that heritage and group engineering.

What’s the difference between the R32 and R290 models?

The HP40 and HP50 use R32 refrigerant — proven and efficient up to around 55–65°C flow. The HP55 and HP60 use R290 (propane), which has a much lower global-warming potential (GWP 3 versus ~675) and reaches 75°C flow — making them the stronger choice for retrofits where you want to keep existing radiators.

Will a Baxi heat pump work with my existing radiators?

Often, yes — especially the high-temperature R290 HP55/HP60, which reach 75°C. Because heat pumps run cooler than boilers, your installer will assess each radiator during the MCS survey and may up-size a few to get the best efficiency. That survey is exactly what your matched installer provides.

What is SCOP, and is 5.34 good?

SCOP is the seasonal coefficient of performance — the average units of heat produced per unit of electricity across a heating season. A SCOP of 5.34 means roughly 5.3 units of heat per unit of electricity, which is very strong. Note it’s a manufacturer figure at 35°C flow for the smallest R290 unit; larger units and higher flow temperatures give lower (still good) numbers.

Do I need a hot-water cylinder and new controls?

Yes. A heat pump is a wet system that heats a hot-water cylinder as well as your radiators or underfloor heating, and it needs its own controls to run efficiently. Baxi supplies matching ASHP cylinders and smart controls (such as the uSense 2), which your installer designs in as a complete package.

Is it noisy, and where does it go?

The outdoor monobloc unit produces sound power from around 48 dB(A) on the R290 models — comparable to a quiet fridge. It sits outside against a wall or on the ground, and your installer positions it to meet permitted-development noise and siting rules (R290 has slightly stricter placement guidance, which they handle).

Can I get the £7,500 grant and 0% VAT with Baxi?

Yes. Fitted by an MCS-accredited installer, a Baxi heat pump qualifies for the Boiler Upgrade Scheme grant (currently £7,500 in England & Wales) and 0% VAT on the installation. Your installer typically handles the grant paperwork for you.

Is the Baxi Auriga a home heat pump?

No — the Auriga range is Baxi’s commercial heat pump (larger 20/30kW modules for big or multi-dwelling buildings). For a home, the right products are the domestic Assure and HP-series monoblocs shown on this page — the HP40, HP50, HP55 and HP60.

How it works

Getting Baxi into your home.

Energy Saving Hub matches you with MCS-accredited independent installers who fit Baxi heat pumps — so you get competitive quotes without the hard sell.

1

Tell us about your home

Answer a few quick questions about your property and heating — it takes about a minute.

2

Get matched to installers

We connect you with trusted independent partners in your area who install Baxi heat pumps.

3

Compare and decide

Receive tailored quotes, compare options at your own pace, and choose what’s right for you.

Like the look of Baxi?

Get free, no-obligation quotes from independent installers who fit Baxi heat pumps near you.

Get my free quote
Keep reading

Helpful guides to plan your switch.

Want the full technical range, spec tables and the latest models?

See the full Baxi ASHP range at baxi.co.uk →

Specifications shown are for the Baxi domestic air-source heat pumps our partners install, taken from Baxi’s official product pages, and are indicative; exact figures, SCOP, flow temperatures and warranty terms vary by model, output and supply route. SCOP values are manufacturer-claimed at 35°C flow. The Baxi Auriga range is a commercial product and is not covered here. Energy Saving Hub introduces homeowners to independent, MCS-accredited installers and does not carry out installations directly.